MYSTIC PLACES – Ollantaytambo
Photograph courtesy of SacredSites.com
Introduction
At the northern end of the Sacred Valley, Ollantaytambo is rare if not unique in Peru.
Ollantaytambo is a massive citadel located 50 kilometers from Machu Picchu. The citadel served as both a temple and a fortress. At some time unknown, and for reasons unknown, work mysteriously stopped on this huge project.
Ollantaytambo is a massive citadel located 50 kilometers from Machu Picchu. The citadel served as both a temple and a fortress. At some time unknown, and for reasons unknown, work mysteriously stopped on this huge project.
Photograph courtesy of SacredSites.com |
|
Inca terraces (left) and megalithic wall (right) at pre-Inca site of Ollantaytambo.
Photograph courtesy of SacredSites.com
Mysterious Pre-Inca megalithic stonework at Ollantaytambo
Stone Technology
The Sun Temple (above) that was constructed
with huge red porphyry (pink granite) boulders. The stone
quarry is named Kachiqhata (Salt Slope) and is located
about 4 km (2.5 miles) away on the other side of the
valley, by the upper side of the opposite south-western
mountains. The boulders were carved partially in the
quarries, and taken down to the valley’s bottom. In order to cross
the river Quechuas constructed an artificial channel parallel to
the natural river bed that served for deviating the
river’s water according to conveniences. Therefore, while
that water flowed through one channel the other was dry,
thus stones could be taken to the other side of the valley.
More over, the boulders were transported to the upper spot
where the temple is erected using the inclined plane that
is something like a road which silhouette is clearly seen
from the valley’s bottom. They had the help of log rollers
or rolling stones as wheels, South-American cameloids’
leather ropes, levers, pulleys, and the power of hundreds and even
thousands of men. Today, on the way from the quarry to the
temple there are dozens of enormous stones that people know
as ” tired stones” because it is believed that they could
never be transported to their destination; those stones are
the reason why some authors claim that the Sun Temple was
unfinished when the Spanish invasion happened.
|
|
Massive, multi-sided blocks were precisely fitted together in interlocking
patterns in order to withstand the disastrous effects of earth quakes.
patterns in order to withstand the disastrous effects of earth quakes.
Scientists speculate that the masonry process
might have worked like this: after carving the desired
shape out of the first boulder and fitting it in place, the
masons would somehow suspend the second boulder on
scaffolding next to the first one. They would then have to
trace out a pattern on the second boulder in order to plan
the appropriate jigsaw shape that would fit the two
together. In order to make a precise copy of the first boulder’s
edges, the masons might have used a straight stick with a hanging
plum-bob to trace its edges and mark off exact points for
carving on the second boulder. After tracing out the
pattern, they would sculpt the stone into shape, pounding
it with hand-sized stones to get the general shape before
using finger-size stones for precision sanding. Admittedly,
this entire technique is merely scientific speculation.
The method might have worked in practice but that doesn’t mean this
is how the ancient Quechua stonemasons did it.
“How were such titanic blocks of stone brought
to the top of the mountain from the quarries many miles
away? How were they cut and fitted? How were they raised
and put in place? Now one knows, no one can even guess.
There are archaeologists, scientists, who would have us
believe that the dense, hard andesite rock was cut, surfaced
and faced by means of stone or bronze tools. Such an explanation is
so utterly preposterous that it is not even worthy of serious
consideration. No one ever has found anywhere any stone
tool or implement that would cut or chip the andesite, and
no bronze ever made will make any impression upon it.”
A. Hyatt & Ruth Verrill —-America’s Ancient Civilizations
Jean-Pierre Protzen thinks the Verrills was wrong. He went
to Cuzco and showed how river rocks could be used as
hammers to pound stones into the desired shape.
“It appears that the Inca technique of fitting the blocks
together was based largely on trial and error. It is a
laborious method, particularly if one considers the size of
some of the huge stones at Sacsahuaman or Ollantaytambo.
What should be kept in mind, however, is that time and
labour power were probably of little concern to the Incas,
who did not have a European notion of time and had plenty
of tribute labour from conquered peoples at their
disposal.”
Jean-Pierre Protzen —Scientific American —Feb. 1986
Was this monolith carved with stone tools?
Eric Von Daniken,
in his series of books beginning with Chariots of the Gods
theorized that the Andean stone-works were build by
Alien/Gods who visited the earth long ago, bringing civilization to
primitive man. The scientific community simply snickered.
Whatever one thinks of his theories, he brought to the public an awareness of the many ancient monuments on earth that seem to defy rational explanation.
Whatever one thinks of his theories, he brought to the public an awareness of the many ancient monuments on earth that seem to defy rational explanation.
Everybody who has traveled to Egypt, Mesopotamia, South
America and many ancient places has seen it: the
astonishing craftsmanship of these ancient stoneworkers.
The precision fit of large stone blocks is eminent in both
the Old and New World. It is hardly imaginable, that all of
this should have been done by pure manual work alone. This
very interesting link, Ancient Stone Technology, also includes theories of Professor Davidovits from the Geopolymer Institute in France.
In short, his theory is that the 2 million blocks of limestone that make up the core of the pyramid of Chufu (Cheops), have not been cut into shape, but the limestone was solved in water, brought to the building place in small portions and then the blocks were cast in situ. Even more interesting are his ideas on the precision-fit Inca walls: He puts forward a technique to soften the stone by use of acid plant extracts!
Another interesting website is STONE TECHNOLOGY. The ancient Egyptians were masters in working with stone. These pages document photographic evidence, historical research and contemporary debates on stone technology. Topics include predynastic stonewares, straight saws, circular saws, tube drilling and lathes – Photos, Research Papers and Newsgroup Debate Summaries.
In short, his theory is that the 2 million blocks of limestone that make up the core of the pyramid of Chufu (Cheops), have not been cut into shape, but the limestone was solved in water, brought to the building place in small portions and then the blocks were cast in situ. Even more interesting are his ideas on the precision-fit Inca walls: He puts forward a technique to soften the stone by use of acid plant extracts!
Another interesting website is STONE TECHNOLOGY. The ancient Egyptians were masters in working with stone. These pages document photographic evidence, historical research and contemporary debates on stone technology. Topics include predynastic stonewares, straight saws, circular saws, tube drilling and lathes – Photos, Research Papers and Newsgroup Debate Summaries.
No comments:
Post a Comment